Skip to Main Content »

Call our Engineers

Monday – Friday 8:00am – 5:00pm (EST)

Toll Free: 855-FREW-PRO

(855-373-9776)

Your shopping cart is empty

Meter Mounted Signal Transmitters

Meter Mounted Signal Transmitters

9 Item(s)

  1. Badger Meter EC-A Signal Transmitter

    Badger Meter EC-A Signal Transmitter

    The Badger Meter EC-A electric contacting register is used on Badger Meter Disc and Turbo meters to provide an electric pulse output for a given quantity of liquid metered. In a typical ap¬plication, the pulses would be transmitted to a chemical feed pump for boiler makeup water or for cooling towers. The top portion of the EC-A unit consists of a register with a non-resettable totalizer.
  2. Badger Meter EPT-1XP and PEPT-1 Signal Transmitters

    Badger Meter EPT-1XP and PEPT-1 Signal Transmitters

    The Badger Meter PEPT-1 and EPT-1 are two-wire electronic, high resolution pulse transmitters designed for use with Badger Meter's Disc and OP meter lines. The EPT-1 utilizes rugged NEMA 4X rated bronze housing suitable for hazardous locations while the PEPT-1 is housed in NEMA 4 rated corrosion resistant plastic.
  3. Badger Meter FT-1, PFT-2 and FT-2XP Signal Transmitters

    Badger Meter FT-1, PFT-2 and FT-2XP Signal Transmitters

    The Badger Meter FT-1, PFT-2 and FT-2XP mechanical transmitters are designed for use with Badger's magnetic drive meters. Mounted on the meter, the transmitter can be wired to the PC-100 batch controller, ER-8 and ER-9 registers, or other pulse-operated instruments that have scaling capabilities and that can receive pulses from a reed switch. Typical applications would be chemical batching systems, chemical additive systems, and other applications that require totalizing meter flow and monitoring rate of flow of fluid passing through the flow meter.
  4. Badger Meter FT-1E, PFT-2E and PFT-3E Signal Transmitters

    Badger Meter FT-1E, PFT-2E and PFT-3E Signal Transmitters

    The Badger Meter FT-1E, PFT-2E and PFT-3E are electronic transmitters with unscaled pulse outputs designed for use with Badger Meter's line of industrial turbo, disc, and oscillating piston flow meters. These transmitters incorporate magnetoresistive sensors with open collector NPN transistor outputs. They will interface with Badger's PC100 controller as well as other devices that have similar operating characteristics.
  5. Badger Meter MS-E1 and  MS-ER1 Signal Transmitter

    Badger Meter MS-E1 and MS-ER1 Signal Transmitter

    The Badger Meter MS-E1 and MS-ER1 are mechanical transmitters that provide a scaled electrical pulse signals (switch closure type) for each discrete unit of liquid volume metered. The signal is used to operate instruments and controls. Because of the simplicity of these transmitters, maintenance procedures are minimized, furthermore, the enclosure provides watertight protection and is designed to explosion-proof specifications.
  6. Badger Meter PFT-1E and PFT-4E Signal Transmitters

    Badger Meter PFT-1E and PFT-4E Signal Transmitters

    The Badger Meter PFT-1E and PFT-4E are electronic scalable pulse transmitters with AC/DC inputs and outputs. These electronic transmitters can be scaled to almost any pulse rate, allowing recalibration by resetting the scale factor with four rotary switches. The PFT-1E transmitter can be calibrated for use with different size meters simply by re-setting the rotary switches.
  7. Badger Meter PFT420, PFT420/2 and FT420B Analog Flow Transmitters

    Badger Meter PFT420, PFT420/2 and FT420B Analog Flow Transmitters

    The Badger Meter PFT420, PFT420/2 and FT420B are versatile analog flow transmitters for use with Badger's complete line of flow meters. These solid state units produce a 4-20 mA DC output signal through a two-wire design. They also provide a digital pulse output. The outputs are isolated from power supply negative. The 4-20 mA output signal is directly proportional to the rate of flow through the meter. The signal has excellent linearity, accuracy and repeatability.
  8. Badger Meter PM-5 and MS-E5XP Signal Transmitters

    Badger Meter PM-5 and MS-E5XP Signal Transmitters

    The Badger Meter PM5 and MSE5XP mechanical pulse transmitters are designed to be used with Badger Meter's magnetic drive meters including the OP and Disc meter lines. These transmitters are used in metering systems that require pulse closures for recording rate of flow, quantity of flow, liquid feeding, blending and batching. The pulse transmitter provides a scaled electrical pulse signal (switch closure type) for each discrete unit of liquid volume metered. The signal is used to operate instruments and controls.
  9. Badger Meter RTR Signal Transmitter

    Badger Meter RTR Signal Transmitter

    The Badger Meter Recordall Transmitter Register (RTR) is a meter mounted scaled pulse totalizer and signal transmitter. The RTR is the main link for all of Badger's meter reading technologies, as well as the connectivity solution of choice in hundreds of mixed-technology systems. Amazingly flexible, featuring a non-proprietary protocol and very low power requirements, RTRs provide years of reliable, accurate readings for a variety of applications.

9 Item(s)