Skip to Main Content »

Call our Engineers

Monday – Friday 8:00am – 5:00pm (EST)

Toll Free: 855-FREW-PRO

(855-373-9776)

Your shopping cart is empty

Blanket Gas Regulators

Blanket Gas Regulators

4 Item(s)

  1. 3011 L / H / HP - Blanket Gas Regulator

    3011 L / H / HP - Blanket Gas Regulator

    Product Features: Available models: L (0.5 - 2 in. W.C. settings), H (higher set pressure from lower supply pressures), and HP (high pressure, up to 1.99 psig) Even higher set pressures available with the Model 3020A Single stage regulation - 200 PSIG to 0.5" W.C. Bubble tight shut-off All stainless steel construction Balanced forces acting on piston (setting is not affected by supply pressure) Compact size and weight Molded Teflon
  2. Model 3020A Blanket Gas Regulator for Very High Pressure

    Model 3020A Blanket Gas Regulator for Very High Pressure

    The Model 3020 Blanket Gas Regulator ensures that a constant gas pressure is maintained in the vapor space of a storage tank. A blanket gas regulator supplies an inert gas to prevent a vacuum from developing when liquid is removed from a tank, to maintain the desired blanket pressure when the temperature drops, and to prevent outside air from contaminating the tank or creating a flammable or explosive environment. A blanket gas pressure prevents outside air and moisture from entering the storage vessel and reduces the evaporation of the stored product to a negligible amount. The result conserves product, greatly reduces emissions, and protects the tank from external fires.
  3. Model 3041 L / H / HP Blanket Gas Regulator for Vacuum

    Model 3041 L / H / HP Blanket Gas Regulator for Vacuum

    The Model 3041 Blanket Gas Regulator ensures that a constant vacuum is maintained in the vapor space of a storage tank. See the Series 3000 Blanket Gas Regulators bulletin for technical specifications.
  4. Model 3070 Blanket Gas Regulator

    Model 3070 Blanket Gas Regulator

    Features: • Direct acting, modulating valves with a patented force multiplying linkage (not used in 3011HP, 3041HP, or 3020A models) • Balanced forces acting on piston (setting is not affected by supply pressure) • Compact size and weight • Setting range is from –10 psig to +15 psig (Consult the factory for other settings) • Molded Teflon® 1 (FEP) Actuator Diaphragm • NPT or flange connections • Wide selection of elastomer seal materials • Field adjustable flow capacity (5%-100%) • Remote installation configuration available • Available for vacuum service

4 Item(s)