Skip to Main Content »

Call our Engineers

Monday – Friday 8:00am – 5:00pm (EST)

Toll Free: 855-FREW-PRO

(855-373-9776)

Your shopping cart is empty

Flame Arresters & Detonation Arresters

Flame Arresters & Detonation Arresters

8 Item(s)

  1. Groth Corp. Model 7618 Flame Arrester, Vertical Installation

    Groth Corp. Model 7618 Flame Arrester, Vertical Installation

    The Groth 7618 Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
  2. Groth Corp. Model 7622 Flame Check

    Groth Corp. Model 7622 Flame Check

    Model 7622 is designed to prevent flashback in small lines carrying flammable gases. They are often used in small pilot lines and are intended for use where the gas flow can be shut off. The Flame Checks are union type fittings with FNPT connections.
  3. Groth Corp. Model 7628 Flame Arrester, Horizontal Installation

    Groth Corp. Model 7628 Flame Arrester, Horizontal Installation

    The Groth 7628 Flame Arrester is designed to inhibit flame and deflagration propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
  4. Groth Corp. Model 7658A Flame/Detonation Arrester - Group D Gases

    Groth Corp. Model 7658A Flame/Detonation Arrester - Group D Gases

    The Groth 7658 Detonation Flame Arrester is designed to inhibit flame and detonation propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arresters protect low flash point liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety. Designed for NEC Group "D" gases and vapors.
  5. Groth Corp Model 8800A Pressure/Vacuum Relief Valve and Flame Arrester

    Groth Corp. Model 8800A Pressure / Vacuum Relief Valve and Flame Arrester

    The Groth Model 8800A is a combination of the 1200A Pressure Vacuum Relief Valve and Groth Model 7618 Flame Arrester. The superior Buna-N seating diaphragms are standard on the valve to insure extra tight sealing to prevent sludge vapors escaping. Self draining housing body and drip rings protect seating surface from condensate and freezing. The 1200/7618 helps protect your tank from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition. The result is reduced emissions level and increased fire protection and safety.
  6. Groth Corp. Model 8800SDV Pressure / Vacuum Relief and Flame Arrester w/ Safety Diverter Valve

    Groth Corp. Model 8800SDV Pressure / Vacuum Relief and Flame Arrester w/ Safety Diverter Valve

    The Groth Model 8800SDV is a pair of Groth Model 8800 assemblies (which consist of the 1200A Pressure Vacuum Relief Valve and the 7618 Flame Arrester in series) mounted to a three-way safety diverter valve to allow for maintenance. See the 8800 literature for technical information.
  7. Groth Corp. Model 8820A Pressure / Vacuum Relief Valve and Flame Arrester w/ Pipe-Away

    Groth Corp. Model 8820A Pressure / Vacuum Relief Valve and Flame Arrester w/ Pipe-Away

    The Groth model 8820A is a combination of the 1220A Pressure Vacuum Relief Valve and Groth Model 7618A Flame Arrester. The superior Buna-N seating diaphragms are standard on the valve to insure extra tight sealing to prevent sludge vapors escaping. Self draining housing body and drip rings protect seating surface from condensate and freezing. The 1200/7618 helps protect your tank from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition. The result is reduced emissions level and increased fire protection and safety.
  8. Model 7758A Flame/Detonation Arrester - Group C & D Gases

    Model 7758A Flame/Detonation Arrester - Group C & D Gases

    Groth Model 7758A flame and detonation arresters are proven to inhibit flame propagation in gas piping systems and to protect liquid storage tanks containing vapors with MESG equal to or greater than 0.025

8 Item(s)