Skip to Main Content »

Call our Engineers

Monday – Friday 8:00am – 5:00pm (EST)

Toll Free: 855-FREW-PRO

(855-373-9776)

Your shopping cart is empty

Knife Gate Valves

Knife Gate Valves

Items 1 to 10 of 18 total

Page:
  1. 1
  2. 2
  1. Orbinox Model AT Unidirectional-Split Body Knife Gate Valves

    Orbinox Model AT Unidirectional-Split Body Knife Gate Valves

    Cast or fabricated construction and precise gate guiding inside the body make this valve a perfect choice for demanding applications (transport of very heavy fluids, food industry…).
  2. Orbinox Model BC (Series 90) Square Port Knife Gate Valves

    Orbinox Model BC (Series 90) Square Port Knife Gate Valves

    The BC model knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications.
  3. Orbinox Model BT (Series 21) Bidirectional-MSS SP-81 Knife Gate Valves

    Orbinox Model BT (Series 21) Bidirectional-MSS SP-81 Knife Gate Valves

    The BT model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids.
  4. Orbinox Model BX Coal Burner Isolation (ATEX Cat 1) Knife Gate Valves

    Orbinox Model BX Coal Burner Isolation (ATEX Cat 1) Knife Gate Valves

    The BX model knife gate is a bi-directional wafer valve specifically designed for the isolation of pulverized coal burner lines on coal fired boilers during maintenance. The valve is dust tight which makes it suitable for other bulk handling applications, such as silo outlet valves. This valve has been designed for use in potentially explosive areas (ATEX) and it complies with DIN EN 14460 (Explosion resistant equipment). In the closed position, the valve can be used as an effective measure against flame propagation in the event of an explosion.
  5. Orbinox Model CR (Series 70) round & Square Port Knife Gate Valves

    Orbinox Model CR (Series 70) round & Square Port Knife Gate Valves

    The CR model knife gate is a heavy duty valve designed for handling difficult applications. This valve is suitable for use in recycle applications, like junk or sand traps of pulpers, high consistency cleaners... or as silo outlet with solid material.
  6. Orbinox Model DT (Series 80) Double Gate Knife Gate Valves

    Orbinox Model DT (Series 80) Double Gate Knife Gate Valves

    The DT model knife gate is double gate valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or contaminated media. In open position, both gates retract into the body and allow full flow
  7. Orbinox Model E8 (Series 11) Bidirectional Knife Gate Valves

    Orbinox Model E8 (Series 11) Bidirectional Knife Gate Valves

    The EB model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids.
  8. Orbinox Model EK Unidirectional - HP Knife Gate Valves

    Orbinox Model EK Unidirectional - HP Knife Gate Valves

    The EK model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids.
  9. Orbinox Model ET (Series 20) Unidirectional-MSS SP-81 Knife Gate Valves

    Orbinox Model ET (Series 20) Unidirectional-MSS SP-81 Knife Gate Valves

    The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.
  10. Orbinox Model EX (Series 10) Unidirectional Knife Gate Valves

    Orbinox Model EX (Series 10) Unidirectional Knife Gate Valves

    The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff.

Items 1 to 10 of 18 total

Page:
  1. 1
  2. 2