Skip to Main Content »

Call our Engineers

Monday – Friday 8:00am – 5:00pm (EST)

Toll Free: 855-FREW-PRO

(855-373-9776)

Your shopping cart is empty

Penstocks/Sluice Gates

Penstocks/Sluice Gates

8 Item(s)

  1. Orbinox Model AG Stop Gate

    Orbinox Model AG Stop Gate

    The Orbinox model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is hand operated or hoist operated for larger sizes. The sealing system is incorporated on both laterals and bottom area of the slide, resulting in a substantially watertight seal without the nned of wedges on the gate. From sizes 6" x 6" (150mm x 150mm) to 80"x80" (2000mm x 2000mm), the AG model has a unique "lip" type seal design. The leakage rate on the Orbinox stop gate is lower than the maximum alllowable recommended by AWWA (C513-05) under normal conditions. The frame of the AG model is typically embedded in a concrete channel for both uni-directional (seating head only) or bi-directional sealing (seating and unseating water head).
  2. Orbinox Model CC Channel Penstock

    Orbinox Model CC Channel Penstock

    Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides. Used for on-off or control applications in open channels. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads.
  3. Orbinox Model MU Wall Penstock

    Orbinox Model MU Wall Penstock

    Square or rectangular port sliding wall penstocks sealed on all 4 sides. Used for on-off or control applications in wells, tanks, pipe outlets, etc. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals.
  4. Orbinox Model RB Weir Gate

    Orbinox Model RB Weir Gate

    The Orbinox model RB weir gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant upstream water elevation. The RB model weir gate is available from sizes 6”x6” (150mm x 150mm) up to 80”x80” (1200mm x 1200mm).
  5. Orbinox Model RC Rectangular Flap Gate

    Orbinox Model RC Rectangular Flap Gate

    Square or rectangular swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a counterweight for adjustment and control of the opening.
  6. Orbinox Model RR Round Flap Gate

    Orbinox Model RR Round Flap Gate

    Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a counterweight for adjustment and control of the opening.
  7. Orbinox Model SA Aluminum Stop Log

    Orbinox Model SA Aluminum Stop Log

    The Orbinox model SA Aluminum Stop Log is designed for open channel installations for temporary isolation and flow control. Stop Logs are ideal for maintenance and repair works or flood control and diversion. The logs are made of extruded aluminum and are very easy to handle due to their light weight.
  8. Orbinox Model SL Stop Log

    Orbinox Model SL Stop Log

    The Orbinox model SL Stop Log is designed for open channel installations in waste water treatment plants, irrigation, hydraulic works and hydro-electric power plants. The slide is formed by several logs that fit on top of each other in the frame. By adding or removing logs, the SL model allows to control the flow of a channel in a economical way.

8 Item(s)