Our Engineers Want to Help You!

Connect with our Team
Loading...
Data Industrial PVC Tee

Data Industrial Hot Tap Flow Sensors - Series 225 & 226

Series 735 Sensors

Data Industrial Series 735 Sensors

Data Industrial Series 4000 Sensor

The 4000 series flow sensor is an in-line, flow-through design using a tangential six bladed impeller. Its compact molded design allows the 4000 series to replace old style magnetic sensors with little or no piping changes.

The proprietary non-magnetic detection circuit is available with two outputs: a low impedance 3-wire 5 volt DC square wave signal (that can be pulled up to 20 volts) capable of traveling up to 2000 feet without amplification, or a 2-wire loop powered 4-20 mA current analog signal. These two signal formats are compatible with most data acquisition or PLC equipment.

Request a Quote
Availability: In stock
SKU
DI00600W

The 4000 series flow sensor is an in-line, flow-through design using a tangential six bladed impeller. Its compact molded design allows the 4000 series to replace old style magnetic sensors with little or no piping changes.

The proprietary non-magnetic detection circuit is available with two outputs: a low impedance 3-wire 5 volt DC square wave signal (that can be pulled up to 20 volts) capable of traveling up to 2000 feet without amplification, or a 2-wire loop powered 4-20 mA current analog signal. These two signal formats are compatible with most data acquisition or PLC equipment.

FEATURES

  • 4-20 mA Analog output programmable in field
  • Low flow capabilities
  • Flow detection electronics can be serviced or replaced without opening the pipe. No exposure to wetted parts
  • Impeller bearings and shaft can be easily replaced without removing the sensor from the pipe
  • Documented operating service life in high temperature ultrapure water. Over 40 months of continuous 24 hr/day operation
  • Superior particle-shedding performance verified by independent laboratory testing
  • Particle sizes from 0.1 micron to 1.0 micron representing “on wafer” metallic contamination (ELYMAT) and liquid-born particles were monitored
  • CE tested and approved by independent laboratory

SPECIFICATIONS

  • Size:  1/2...1 in.
  • Temperature Range:  Up to 220°F
  • Flow Range:  0.25…20 ft/sec
  • Pressure Range:  Up to 350 PSI
  • Accuracy:  ±0.5%