Our Engineers Want to Help You!

Connect with our Team
Loading...
Eastech Flow Controls VANTAGE 2200 Series Open Channel Flow & Level Meters

Eastech Flow Controls VANTAGE 2200 Series Open Channel Flow & Level Meters

Eastech Flow Controls CHARTMETER 5000 - The First Flowmeter with a Built-In Chart Recorder

Eastech Flow Controls CHARTMETER 5000 - The First Flowmeter with a Built-In Chart Recorder

Eastech Flow Controls VANTAGE 4000 Series Closed Pipe Transit-Time Ultrasonic Flowmeters

The engineers at Eastech Flow Controls realized that for a new product to be successful, it must be simple to install and quickly made operational. In order to accomplish this goal, every Vantage 4000 is shipped to the field factory pre-programmed to the conditions set forth by the customer. Pre-programming specifications are electronically confirmed on the display of the transmitter. If changes to the meter's factory pre-programming is required, re-programming can simply be accomplished on the meter keypad. Available in models 4400 and 4600.
Request a Quote
Availability: In stock
SKU
EF00500W
The engineers at Eastech Flow Controls realized that for a new product to be successful, it must be simple to install and quickly made operational. In order to accomplish this goal, every Vantage 4000 is shipped to the field factory pre-programmed to the conditions set forth by the customer. Pre-programming specifications are electronically confirmed on the display of the transmitter. If changes to the meter's factory pre-programming is required, re-programming can simply be accomplished on the meter keypad. Available in models 4400 and 4600.

Model 4400:
  • -One 4-20 mA output
  • -One SPDT relay
  • -RS232 Serial Port
  • -Uni-directional


Model 4600:
  • -Two 4-20 mA output
  • -Three SPDT Relays
  • -RS232 Serial Port (Modbus RTU Protocol)
  • -RS485 Serial Port (Modbus RTU Protocol)
  • -Internal datalogger
  • -Bi-directional


Accuracy & Reliability: The Vantage® 4000 employs the latest DSP microprocessor technology. An exclusive signal processing technique combines correlation and FFT detection methods in order to ensure the highest degree of accuracy and reliability possible.
  • -Rangeability: 40 to 0.1 ft/sec
  • -Turndown: 400:1
  • -Repeatability: 0.25%
  • -Accuracy: ±1% of actual flow


SpeedRail™ Sensor Mounting: Since the externally mounted sensor is the preferred design for transmitting signals through pipe or conduit, a new one-piece SpeedRail™ sensor mounting system was developed. Mounting of both sensors is quickly and accurately accomplished in two simple steps. Lock the self-aligning mounting rail to the pipe or conduit and load in the sensors. Once the sensors are connected to the transmitter, the Vantage 4000 is ready to measure flow.

Transmitter: Eastech Flow Controls was the first company to utilize a phase shift detection system in the design of transit-time flowmeters. This technique greatly improves time difference detectability, which in turn, enhances accuracy and operating stability while substantially reducing the effects of noise.